Download 7th International Symposium on High-Temperature by Jiann-Yang Hwang, Tao Jiang, Chris Pistorius, Gerardo PDF

By Jiann-Yang Hwang, Tao Jiang, Chris Pistorius, Gerardo Alvear, Onuralp Yucel, Liyuan Cai, Baojun Zhao, Dean Gregurek, Varadarajan Seshadri

The know-how, operation, power, environmental, research, and destiny improvement of the metallurgical industries using extreme temperature methods are coated within the booklet. The options at the extraction and creation of ferrous and nonferrous metals, alloys, and refractory and ceramic fabrics, the heating techniques and effort administration, and the therapy and utilizations of the wastes and by-products are the subjects of distinctive pursuits. This booklet makes a speciality of the subsequent concerns: •High potency New Metallurgical procedure and expertise primary examine of Metallurgical approach •Alloys and fabrics guidance •Direct aid and Smelting aid •Coking, New strength and atmosphere •Utilization of strong Slag/Wastes and intricate Ores •Characterization of hot temperature Metallurgical Process

Show description

Read or Download 7th International Symposium on High-Temperature Metallurgical Processing PDF

Best international_1 books

Toward the Factory of the Future: Proceedings of the 8th International Conference on Production Research and 5th Working Conference of the Fraunhofer-Institute for Industrial Engineering (FHG-IAO) at University of Stuttgart, August 20 – 22, 1985

The overseas convention on creation examine has a great culture: the 1st convention used to be held in Birmingham 1971 with sixty one members. With admire to the choice that the convention might be held each moment yr, through this time the convention has been held within the following international locations: Birmingham (1971, UK), Copenhagen (1973, Denmark), Amhurst (1975, USA), Tokyo (1977, Japan), Amsterdam (1979, The Netherlands), Novi unhappy (1981, Yugoslavia), Windsor (1983, Canada), Stuttgart (1985, Germany), and the subsequent convention will ensue in Cincinnatti (1987, USA).

Developing International Strategies

This publication makes a speciality of the advance of suggestions for the winning internationalization of huge and medium-sized businesses. turning into overseas bargains vital possibilities for corporations of all sizes, yet in an more and more advanced setting, the strategic making plans concerned is usually a problem.

Additional resources for 7th International Symposium on High-Temperature Metallurgical Processing

Sample text

4ml 100material-1 BJ, the briquetting pressure is 40MPa. The optimum condition of for 1h in nitrogen atmosphere. carbonization is carbonized at 700 [3]. 43 MPa Acknowledgements The authors gratefully acknowledge the financial supports from Baosteel Corporation of China as well as from post-doctoral workstation of Central South University. References [1]. Eberle, A. et al, “Start-up and Operating Results of POSCO COREX Plant,” Iron Steel Eng, 1998, 75, (1), 25–28. [2]. “Coals and Coal Requirements for the COREX Process,” Fuel and Energy Abstracts, Volume 38, Issue 4, July 1997, Page 255.

The standard procedure for leaching tests was to mix 1 gram of ilmenite, 1 gram of salt, 200 milligrams of carbon, and 30 milligrams of iron chloride (when applicable) in an alumina crucible. The crucible was then put into a vertical tube furnace, and taken to 900 ◦ C at a rate of 15-20 ◦ C/minute where it was held for 4 hours, and then cooled to room temperature at the same rate. Gas was flowed at low flow (300 mL/min) at a ratio of 2:1 nitrogen to carbon monoxide, or pure nitrogen. For solubility tests, 50 milligrams of pseudorutile mineral sand was mixed with 50 grams of molten salt in an alumina crucible.

8. 9. 10. 11. 12. 13. Y. Mohassab-Ahmed and H. Y. Sohn, Method and Device for Digestion of Materials in a Microwave Oven, 2012, US Patent App. 61/651. Y. Mohassab-Ahmed, H. Y. " Steel Res. , 85 (2014), 875-884. Y. Mohassab Ahmed, "Phase Equilibria between Iron and Slag in CO/CO2/H2/H2O Atmospheres Relevant to a Novel Flash Ironmaking Technology" (PhD Dissertation, The University of Utah, 2013). Y. Mohassab-Ahmed, H. Y. " Ironmaking Steelmaking, 41(2014), 665 - 675. Y. Mohassab and H. " Ironmaking Steelmaking, 41 (2014), 575-582.

Download PDF sample

Rated 4.10 of 5 – based on 23 votes